Author Topic: Test tower  (Read 890 times)

0 Members and 1 Guest are viewing this topic.

tecker

  • SuperHero Member
  • ******
  • Posts: 2183
Test tower
« on: January 31, 2009, 05:23:15 PM »
I started this test tower and a 4x4 termp on to the deck the real tower will be cinder blocks with steel and concreat in the cellsbut I can do some testing till I get it up.



« Last Edit: January 31, 2009, 05:23:15 PM by (unknown) »

tecker

  • SuperHero Member
  • ******
  • Posts: 2183
Re: Test tower
« Reply #1 on: January 31, 2009, 10:32:53 AM »
First up is a cieling fan conversion an old one Ao Smith ( China ) .I 'm working on another one so I'll post the guts later here's a video with some blades I made for a Delco

http://www.youtube.com/watch?v=EeQ64kpowso
« Last Edit: January 31, 2009, 10:32:53 AM by tecker »

electrondady1

  • SuperHero Member
  • ******
  • Posts: 3120
  • Country: ca
Re: Test tower
« Reply #2 on: January 31, 2009, 06:47:25 PM »
you sure have been cranking them out tecker !
« Last Edit: January 31, 2009, 06:47:25 PM by electrondady1 »

tecker

  • SuperHero Member
  • ******
  • Posts: 2183
Re: Test tower
« Reply #3 on: January 31, 2009, 11:47:04 PM »
Jan an feb and mar are Slow work wise so I've been setting up some starts for the summer .I ve had that conversion up at different places and it was a little bit of a hard start . Maybe one more time with some small mags drilled into the epoxy . I'll put up a stock delco with some mods and I 'll be able to post charge data soon . Also give a breakdown on the alternator frame with the front forks .Most kids bikes have the same races and roughly the same size.
« Last Edit: January 31, 2009, 11:47:04 PM by tecker »