Remote Living > Heating

wood stove from old propane cylinder

(1/1)

kita:
although I agree that modern stoves are typically many times cleaner and more efficient than home made versions, I have a particular application that doesn't warrant such a purchase- an occasional heat source for my live in van when I am stationary for long periods. (i will of course ensure adequate ventilation and maybe even a co alarm)
Although I like the turk burner http://www.green-trust.org/2000/biofuel/turk/default.htm and the babbingtons http://www.geocities.com/wastewatts/babington.html (and rolan burner: http://www.green-trust.org/wvoburner/default.htm)

, they are either too elaborate or unsuitable for such a small space. My intention is to cut up and weld a small size ex propane cylinder, approx 1 foot tall and 1 foot diameter. Crude design, and very simple question- what is the best way to completely evacuate the cylinder before using any cutting or welding tools?
many thanks

 

phil b:
Sorry to be negative here but.....

The propane delivery folks tell me don't even think about cutting that bottle! They claim propane is in the pores of the metal and cannot be made safe enough to cut. It takes very specialized equipment to do this safely.

Having said that, there are ways to cut the propane bottle by filling them with water and cutting just above the water line. That's still a big gamble. They do go BOOM.

Sometimes you can find freon bottles that are about the same size as propane bottles. They are much safer to cut without concern of creating an explosion.

Hope this helps.

Navigation

[0] Message Index