Author Topic: ram pump pressure  (Read 2327 times)

0 Members and 1 Guest are viewing this topic.

alibaba

  • Newbie
  • *
  • Posts: 19
ram pump pressure
« on: March 28, 2006, 09:14:37 PM »
can anybody give me an estimate as to what the water pressure would be when leaving the pump to go uphill through the delivery pipe.

i have 10ft. fall and 15 liters/second flow?


is there a formula which might help?


thank you

« Last Edit: March 28, 2006, 09:14:37 PM by (unknown) »

alibaba

  • Newbie
  • *
  • Posts: 19
Re: ram pump pressure
« Reply #1 on: March 28, 2006, 02:19:34 PM »
here is the image:


<BR><img src="http://www.otherpower.com/images/scimages/5554/ram4.jpg" width=80%><BR>

« Last Edit: March 28, 2006, 02:19:34 PM by alibaba »

Flux

  • Super Hero Member Plus
  • *******
  • Posts: 6275
Re: ram pump pressure
« Reply #2 on: March 28, 2006, 02:30:03 PM »
Usually a ram will pump to 20 times the drive head so your maximum pressure would be about 200ft head but for reasonable efficiency about half that.


What has changed from your last post when you were looking at heads from 1 ft to 4 ft.


Flux

« Last Edit: March 28, 2006, 02:30:03 PM by Flux »