« previous next »
Pages: [1]   Go Down

Author Topic: mixing resin  (Read 1002 times)

0 Members and 1 Guest are viewing this topic.

outback

  • Jr. Member
  • **
  • Posts: 58
mixing resin
« on: January 10, 2008, 02:21:30 PM »
how much talcom powder do you mix with 1 gallon of vinyle ester resin ?
« Last Edit: January 10, 2008, 02:21:30 PM by (unknown) »
Logged

Flux

  • Super Hero Member Plus
  • *******
  • Posts: 6275
Re: mixing resin
« Reply #1 on: January 11, 2008, 10:24:21 AM »
Seems to be no takers on this one.


If it is for a stator I would add as much as possible without making the mix too thick to pour. Not sure what that is in real terms but it will be a lot, you can add a lot before it starts to thicken much.


Flux

« Last Edit: January 11, 2008, 10:24:21 AM by Flux »
Logged

DanB

  • Global Moderator
  • SuperHero Member
  • *****
  • Posts: 2151
  • Country: us
    • otherpower.com
Re: mixing resin
« Reply #2 on: January 11, 2008, 02:43:41 PM »
as a 'general rule' I mix the filler in about 50% by volume.
« Last Edit: January 11, 2008, 02:43:41 PM by DanB »
Logged
If I ever figure out what's in the box then maybe I can think outside of it.

ghurd

  • Super Hero Member Plus
  • *******
  • Posts: 8059
Re: mixing resin
« Reply #3 on: January 11, 2008, 02:55:53 PM »
How does that change the mixed volume?  50CCs of each won't equal 100CCs, right?

G-
« Last Edit: January 11, 2008, 02:55:53 PM by ghurd »
Logged
www.ghurd.info<<<-----Information on my Controller

outback

  • Jr. Member
  • **
  • Posts: 58
Re: mixing resin
« Reply #4 on: January 13, 2008, 07:10:18 AM »
this is kinda a follow up question. do you mix it in before the hardener so you have sufficent time to get it in and mixed well ? thanks to all for the help
« Last Edit: January 13, 2008, 07:10:18 AM by outback »
Logged
Pages: [1]   Go Up
« previous next »