« previous next »
Pages: [1]   Go Down

Author Topic: non conducting washers  (Read 251 times)

0 Members and 1 Guest are viewing this topic.

spinner

  • Jr. Member
  • **
  • Posts: 92
non conducting washers
« on: January 12, 2006, 01:39:31 PM »
I was returning a holesaw to its bin ( unusual, according to my wife *hehe)

while bemoaning another trip to the hardware to get some non-conducting washers for shims when I noticed a plastic ice cream pain..hmm....

hole saw+plastic pail= all kinda washers,shims, whatever

spinner
« Last Edit: January 12, 2006, 01:39:31 PM by (unknown) »
Logged

terry5732

  • Sr. Member
  • ****
  • Posts: 283
  • Country: us
Re: non conducting washers
« Reply #1 on: January 12, 2006, 08:52:50 PM »
I've made many out of scraps of plexiglass too. Even works on harder rubbers. Try old shoe soles.
« Last Edit: January 12, 2006, 08:52:50 PM by terry5732 »
Logged

jace

  • Newbie
  • *
  • Posts: 2
Re: non conducting washers
« Reply #2 on: January 16, 2006, 05:20:03 AM »
What did you use to cut them out?
« Last Edit: January 16, 2006, 05:20:03 AM by jace »
Logged

ghurd

  • Super Hero Member Plus
  • *******
  • Posts: 8059
Re: non conducting washers
« Reply #3 on: January 16, 2006, 06:37:42 AM »
The old-timer next door uses a band saw for plexi, squirts some motor oil where he wants to cut, works great.

G-
« Last Edit: January 16, 2006, 06:37:42 AM by ghurd »
Logged
www.ghurd.info<<<-----Information on my Controller

jace

  • Newbie
  • *
  • Posts: 2
Re: non conducting washers
« Reply #4 on: January 22, 2006, 12:52:17 PM »
Thanks!
« Last Edit: January 22, 2006, 12:52:17 PM by jace »
Logged

picmacmillan

  • Hero Member
  • *****
  • Posts: 523
Re: non conducting washers
« Reply #5 on: February 02, 2006, 02:06:30 PM »
great idea..i like these kinda posts.. :)  pickster

« Last Edit: February 02, 2006, 02:06:30 PM by picmacmillan »
Logged
Pages: [1]   Go Up
« previous next »