I was placing it back on pole after rack/tracker maintenance. The hoe was for used for trenching some new conduit and what I thought would be 5th leg for stability on the slope. It didn't do diddly for front end. A little microburst from passing cloud turned the array into a sail. I was actually off the tractor trying to align mount to post when it blew over. Quite sickening.
Panels were BP SX150B (only poly), BP 2150S, SunTech STP160-24 and Sharp NT 185U1, all about 35Vpm, except the smaller 2 SR50 17v series wired in center of rack. All are seriously spiderwebbed except the SunTech and one SR50. The SX150 has a bucket fork through it. It feels good....well.... better... to be insured.
Anyway Sunelec doesn't seem to deal with large panels or higher voltage stuff. The SunSmith doesn't quite match up to the panel I have left either, after doing some more research.
Good idea to sell the shattered ones on Ebay to recoup my deductible loss rather than take the chance of them dragging down new system. I'm not sure if I can put a couple of them back together again though.