Thanks for your fast response.
I am looking to check several profiles and I need to know the torque at different m/s and as well at certain stalling points .
I have not played with blade software for several decades and I have forgotten a lot -- I am interested again in re-develop the TPCH for low power around 2 to 10 KW wind mills .
Also, will need to know the effects (like vibration) when the blade root shaft is placed offset to add an arm to the torque to increase the torque energy for easier Torque Pitch Control Hub angle setting.
I find somewht: http://www.partenovcfd.com/software.html
Thank you