« previous next »
Pages: [1]   Go Down

Author Topic: Problem with Torque  (Read 740 times)

0 Members and 1 Guest are viewing this topic.

christopher

  • Jr. Member
  • **
  • Posts: 52
Problem with Torque
« on: January 28, 2005, 11:00:01 PM »
Am I thinking right or not, with a 6' blade on a motor conversion where I have 2' lbs. of torque due to cogging. Will I need a 50 mph plus wind speed to get this turning????

Thanks,

Christopher
« Last Edit: January 28, 2005, 11:00:01 PM by (unknown) »
Logged

johnlm

  • Full Member
  • ***
  • Posts: 244
Re: Problem with Torque
« Reply #1 on: January 28, 2005, 07:31:54 PM »
I assume your "2' pounds" is 2 foot pounds, in which case you will only need about 10mph on a 6 ft prop to start it. - by my calculations.  Others may calculate it differently but likely will not be too different.  But not 50 mph, no way.

Johnlm
« Last Edit: January 28, 2005, 07:31:54 PM by johnlm »
Logged
Pages: [1]   Go Up
« previous next »