Hello
I have 40 12mm x 6mm magnets.
For a dual; rotor system I made some test coils and my best result was 4 watts out of a +-110 turn .6mm wire coil at 100hz witch is 600rpm at the blade's
Since I will have 15 coil's (5 per faze) in the full stator I expect to get 60 watt's
This seems a little small for the amount of magnet
I calculated the power by multiplying. Is this right?
I'm thinking that it might be better to use the magnets for a motor conversion.
I've read that conversions give more power for the same magnet size but sinse I will still have to find a cheap motor what is the best option?
greatings,
Bobby
ps: If someone knows an existing genny (conversion or dual rotor) with my size magnets pleas let my know