Author Topic: output  (Read 817 times)

0 Members and 1 Guest are viewing this topic.

windspeed

  • Full Member
  • ***
  • Posts: 105
output
« on: June 07, 2008, 10:44:26 PM »
Can someone tell the answer to this, couldnt find a chart

what would be the output of Dans 10 ft dual rotor in clean wind 13 mph


windspeed

« Last Edit: June 07, 2008, 10:44:26 PM by (unknown) »

Flux

  • Super Hero Member Plus
  • *******
  • Posts: 6275
Re: output
« Reply #1 on: June 08, 2008, 12:03:54 AM »
I doubt that anyone can answer this with any degree of certainty.


I will make a guess at about 180W.


I assume you mean a spot figure at 13mph. If you mean average power at 13mph average windspeed then a fair bit higher due to the Rayleigh distribution.


Flux

« Last Edit: June 08, 2008, 12:03:54 AM by Flux »