Poll

I would recommend....

Using your finger to quench the spark by placing it in between the contacts.
2 (25%)
Blowing it out using a soda straw should work  best.
0 (0%)
Stand on a rubber mat and pour water on it to see if that will work.
0 (0%)
Use large knife switches with 2 foot long handles on all your electric drills
1 (12.5%)
That's what they designed HexMosFets for silly !
1 (12.5%)
It seems potentially like too much potential to me !
0 (0%)
Wear Electrician HV rubber gloves at all  times while using power tools.
0 (0%)
Getting someone else to turn things off and on would be the safest.
2 (25%)
Roasting hot dogs on the switch until it cools down is the most effecient.
1 (12.5%)
Rubber switches that stretch the contacts apart for greater separation.
1 (12.5%)

Total Members Voted: 0

Author Topic: I would recommend....  (Read 1039 times)

0 Members and 1 Guest are viewing this topic.

admin

  • Sr. Member
  • ****
  • Posts: 283
I would recommend....
« on: April 30, 2005, 01:55:52 AM »
(poll)
« Last Edit: April 30, 2005, 01:55:52 AM by scoop »