Author Topic: Need some navigating help  (Read 1785 times)

0 Members and 1 Guest are viewing this topic.

Norm

  • Hero Member
  • *****
  • Posts: 1841
  • Country: us
  • Ohio's sharpest corner
Need some navigating help
« on: February 11, 2005, 03:22:18 PM »
Hi Dans

    I've  modified my 88 cent calculators for a

reed switch to be used, about to publish it on

my website...I'd like to provide a link to your

reed switch but I get lost in your products page

...could you help me out?

it'll be here:

http://www2.suite224.net/~peppysue/Projects.html

you probably remember my original posting on this:

http://www.fieldlines.com/story/2003/12/21/17710/268

Then in the meantime....I ran across this posting

which reinforces my idea....from the posting by

Domwild

http://www.fieldlines.com/story/2004/12/1/223128/557

   to this I'd only like to add, you can't very well solder the printed circuits on these new cheap calculators they're printed onto plastic

with conductive ink....the modified project on my

web page shows one way to tap into the circuit.

                   Havin Fun!

                   ( :>) Norm


 

« Last Edit: February 11, 2005, 03:22:18 PM by (unknown) »

Norm

  • Hero Member
  • *****
  • Posts: 1841
  • Country: us
  • Ohio's sharpest corner
Re: Need some navigating help
« Reply #1 on: February 11, 2005, 08:34:39 AM »
   Sorry about that ...found it....but you seem

to be out of stock...well maybe by the time someone clicks on the link...........

               ( :>) Norm.
« Last Edit: February 11, 2005, 08:34:39 AM by (unknown) »