Author Topic: A few windmill and electricity questions  (Read 1490 times)

0 Members and 1 Guest are viewing this topic.

Eric eb

  • Newbie
  • *
  • Posts: 2
A few windmill and electricity questions
« on: June 30, 2005, 12:01:18 AM »
I need some help with a few things and I have a few questions.


  1. Is is possable to run a 110v ac heater off of the same or lower voltage DC?
  2. How much would a 8in diameter steel pipe hold whith out any guide wires. For my situation a solid tower is best and I think I can find some cheep used 8in steel pipe. I'm going to be putting an approxmitly 10 foot dim blade machine on top.
  3. Are resistors good for heat, do they last a long time.
  4. What all can I run directly off my generator, Just heaters or is there anything else. What about if I chang it to DC.
  5. how thick of coils do you make compared to your magnet size.


Thanks for any and all help!

« Last Edit: June 30, 2005, 12:01:18 AM by (unknown) »