« previous next »
Pages: [1]   Go Down

Author Topic: Using LED to gauge voltage  (Read 1274 times)

0 Members and 1 Guest are viewing this topic.

(unknown)

  • Guest
Using LED to gauge voltage
« on: September 10, 2004, 02:40:10 PM »
I have a device that uses 3VDC and I want to install a LED that will go out at 2.4V.

so I know it's time to change batteries?
« Last Edit: September 10, 2004, 02:40:10 PM by (unknown) »
Logged

richhagen

  • Hero Member
  • *****
  • Posts: 1597
  • Country: us
Re: Using LED to gauge voltage
« Reply #1 on: September 11, 2004, 03:49:46 PM »
This circuit flashes an led when the voltage is under 2.4V.  Might serve your needs without any modifications.

http://www.discovercircuits.com/B/batt-mon.htm


Just Having fun,

Rich Hagen

« Last Edit: September 11, 2004, 03:49:46 PM by (unknown) »
Logged
A Joule saved is a Joule made!

(unknown)

  • Guest
Re: Using LED to gauge voltage
« Reply #2 on: September 13, 2004, 06:30:34 AM »
Rich,


Thankyou very much.  That looks like the solution.

« Last Edit: September 13, 2004, 06:30:34 AM by (unknown) »
Logged
Pages: [1]   Go Up
« previous next »