Author Topic: Connecting 12v to 24v charger/converter, Help  (Read 1159 times)

0 Members and 1 Guest are viewing this topic.

jare

  • Newbie
  • *
  • Posts: 2
Connecting 12v to 24v charger/converter, Help
« on: January 21, 2005, 06:52:26 PM »
Hi:

I recently buy a 12v to 24v charger/converter to use in a emergency, charging my 24v battery bank with my car alternator (50 amp iddle) , but it's not clear to me because in the instruction diagram they use two 12v batt in serial to explain the conection, because my batt bank is diferent I need some advice from you guys.

Thans in advance


Jare




« Last Edit: January 21, 2005, 06:52:26 PM by (unknown) »

drdongle

  • Hero Member
  • *****
  • Posts: 552
Re: Connecting 12v to 24v charger/converter, Help
« Reply #1 on: January 21, 2005, 07:36:28 PM »
Scan the original manufacturers diagram and post it, then we can make recommendations.
« Last Edit: January 21, 2005, 07:36:28 PM by (unknown) »

(unknown)

  • Guest
Re: Connecting 12v to 24v charger/converter, Help
« Reply #2 on: January 22, 2005, 01:36:37 AM »
connect the 12 v from yr vehicle to gnd and 12 as marked in the plate then 24volts to source to be charged.


regards,


seema

« Last Edit: January 22, 2005, 01:36:37 AM by (unknown) »

ghurd

  • Moderator
  • Super Hero Member Plus
  • *****
  • Posts: 8059
Re: Connecting 12v to 24v charger/converter, Help
« Reply #3 on: January 22, 2005, 06:46:46 PM »
What is the 'STA'?

G-
« Last Edit: January 22, 2005, 06:46:46 PM by (unknown) »
www.ghurd.info<<<-----Information on my Controller