Today I accidentally over revved an AR100 Voltmaster 10kw generator. Now there is on power output. I have checked all the circuit breakers and they are OK. It turns fine by hand, smooth bearing movement, no drag. It runs smooth on the engine as well, no bad noises, smooth. No smoke either. It is a brushless generator with capacitors designed for 3600rpm. I think it hit about 5000rpm before I got it stopped. There was no load on it at the time. However it did to have some drag as I shut it down. None now though. Do you think this generator is toast. Could it be that the capacitors are blown. Any advice is appreciated. Thanks ... Ken