« previous next »
Pages: [1]   Go Down

Author Topic: C40 Charge Controller LCD Question  (Read 1201 times)

0 Members and 1 Guest are viewing this topic.

FreeBreeze

  • Newbie
  • *
  • Posts: 12
C40 Charge Controller LCD Question
« on: August 01, 2006, 12:29:25 PM »
I recently completed a Hugh Piggot 2.4 Metre Wind Turbine and have it on a test stand in my backyard.I have the charge controller wired temporarily with a diversion mode in place.I dont have my tower completed yet so it is not producing the power I would like but its still making power.

 The Charge controller is showing amp hours is this used amp hours  or created amp hours?


Thanks Freebreeze

« Last Edit: August 01, 2006, 12:29:25 PM by (unknown) »
Logged

henjulfox

  • Full Member
  • ***
  • Posts: 109
Re: C40 Charge Controller LCD Question
« Reply #1 on: August 01, 2006, 07:47:12 AM »
It is showing the amp hours that have flowed through it. Assuming you are using it as your dump load controller, it is showing amp hours dumped.

-Henry
« Last Edit: August 01, 2006, 07:47:12 AM by (unknown) »
Logged
Pages: [1]   Go Up
« previous next »