« previous next »
Pages: [1]   Go Down

Author Topic: Xantrex  (Read 927 times)

0 Members and 1 Guest are viewing this topic.

NeilMan

  • Newbie
  • *
  • Posts: 13
Xantrex
« on: November 08, 2008, 03:16:46 PM »
Hi all, have a question about a Xantrex charge controller display, I have it hooked up

to the home brew 10ft gen , and I was wondering why the display only shows the volts, and not the watts or amps.


Thanks

« Last Edit: November 08, 2008, 03:16:46 PM by (unknown) »
Logged

Ungrounded Lightning Rod

  • SuperHero Member
  • ******
  • Posts: 2866
Re: Xantrex
« Reply #1 on: November 10, 2008, 02:58:47 PM »
Model number info please.
« Last Edit: November 10, 2008, 02:58:47 PM by (unknown) »
Logged

NeilMan

  • Newbie
  • *
  • Posts: 13
Re: Xantrex
« Reply #2 on: November 10, 2008, 04:54:31 PM »
It's a C60 , I was playing with the jumpers and I did get it to work but the voltage

on the display is wrong, I have the main unit on 12 volts and the display on 24 volts and it shows the amps and watts but when I put the main unit jumper to 24 and leave the display jumper at 24 only the voltage shows. Can't figure this one out.


Thanks

« Last Edit: November 10, 2008, 04:54:31 PM by (unknown) »
Logged
Pages: [1]   Go Up
« previous next »