Author Topic: Dump load options  (Read 10304 times)

0 Members and 1 Guest are viewing this topic.

Miller Time

  • Newbie
  • *
  • Posts: 10
Re: Dump load options
« Reply #33 on: March 29, 2009, 06:10:04 PM »
Alright,  Thankyou people for the enlightened conversation.  Especially the perpetual motion in the ocean bit.  Very Nice and doable perhaps ah!!!


So anyway, batteries are the dam and the turbine is the river.  As long as I create a dump load that is large enough to handle the max amperage of the turbine your saying I'll be O.K right??  What if the dump is larger than the max amperage??  Will the dam break??


A little off topic now but has anyone ever tried 1x2x.5 inch magnets upright on end mounted on a cirle ring.  One holding the bottom of mags and one holding the top.  The mags would be held at an angle say 45 degrees all facing the same way.  Then another cirle of magnets done the same but on smaller discs and facing the opposite way.  Would the angle be such that it would repel the magnets???


Thats just some silly food for thought:-)


Miller  OUT

« Last Edit: March 29, 2009, 06:10:04 PM by (unknown) »