Formulas and calculators > Coil winding

excel tool for calculating axial flux generators

(1/14) > >>

Menelaos:
Hi Fieldliners,

As I am working on my 6 KW on grid axial flux generator I was creating an excel tool to make Things a little easier. I don't know if you guys over here already have a tool similar to this one...but in case you don't I would like to introduce the one I made. It may not be too easy to understand when looking at it for the first time but I am looking forward to your comments on it. I tried to translate it from German to English...so please don't mind spelling mistakes. Some things are still to be added and the tool will be updated on a regular basis.

Max

PS. I tried to post before...hope i didn't double post...

Menelaos:
hm...ok...so nobody seems to be interested... :(

dlenox:
Menelaos,

why not put up the .xls so others can play with it, only then would they be able to provide feed back.

dan lenox

fabricator:
It looks pretty cool to me.

WindJuggler:
First of nice program.

There was someone else looking for some formulas you should have used.
http://fieldlines.com/board/index.php/topic,141270.0.html

Have you tested the program with a real generator? If you do let us know how the numbers are compared to the calculations.
I have played around with it. It is pretty much self explanatory.
I work the other way around when I'm designing my rotor and stator. Start with a diameter and see if the coils would fit.

Navigation

[0] Message Index

[#] Next page