« previous next »
Pages: [1]   Go Down

Author Topic: 750 Axial Flux  (Read 2510 times)

0 Members and 1 Guest are viewing this topic.

axlflx

  • Newbie
  • *
  • Posts: 7
  • Country: us
750 Axial Flux
« on: August 22, 2015, 12:56:16 PM »
i had a question i posted earlier....but with the link to the manufacturer....i didnt know that i cannot post a link to the website....sorry about that....
i have found the answer to my question which i like to share in the form of video posted on the product website.....
https://www.youtube.com/watch?v=fH8zaq8m56A
https://www.youtube.com/watch?v=fH8zaq8m56A
Logged

axlflx

  • Newbie
  • *
  • Posts: 7
  • Country: us
Re: 750 Axial Flux
« Reply #1 on: August 22, 2015, 12:57:37 PM »
its producing 48 volts....
can i use a mppt controller with that to charge 12v or 24v battery?
i need to make sure if its possible.
Logged

axlflx

  • Newbie
  • *
  • Posts: 7
  • Country: us
Re: 750 Axial Flux
« Reply #2 on: August 30, 2015, 01:18:59 PM »
wow there is now another one...its 1800 Watt (2400 watt maximum)

https://www.youtube.com/watch?v=JChTFyH5ZHM
Logged

Mary B

  • SuperHero Member
  • ******
  • Posts: 3205
Re: 750 Axial Flux
« Reply #3 on: August 30, 2015, 09:19:16 PM »
500 rpm cut in is pretty steep!
Logged

electronbaby

  • Sr. Member
  • ****
  • Posts: 407
  • Country: us
    • Windsine.org
Re: 750 Axial Flux
« Reply #4 on: October 28, 2015, 11:25:08 PM »
It seems from the video that he has quite the large airgap. Maybe cut-in can be lowered by using a thinner stator and asking for less power possibly?

RoyR
Logged
Have Fun!!!  RoyR KB2UHF
Pages: [1]   Go Up
« previous next »