I thought I'd post this little sample of my logging system. This is a fully charged 12 volt system ~ 690 A/hr bank . The interesting part is that I had to remove my dumpload controller as I am rebuilding it. Notice how there is a level in the graph around 14.2 v , that is where my Blue Sky MPPT is controlling my ~ 400W of solar. This is a bad wind day, but even so, notice the peaks above 14.2 generated from 2 small turbines, with my dump controller there would stil be peaks, but not above 14.3 and not lasting very long. I just though this was interesting to post this for someone to see as a graphic.
If the wind gets better I'll use some of the bank capacity manually to reduce the voltage , until I get the controller back
