"PMA-----Down Tower-----Rectifier/Charge Controller-----Batteries(in paralell)-----Inverter-----Load"
I'm not familiar with the charge controller, maybe someone else will chime in. But if it uses some form of dump mechanism to dump off the rectified side you are ok .
There are other subtle variations that are acceptable (Rectify before going down tower etc) . However your scheme is how I do it, without the charge controller, dumping off batteries instead, rectifier straight to batteries. Yout charge controler may have this as part of it, make sure.
PMA-----Down Tower-----Rectifier-----Batteries(in paralell)-----Inverter-----Load
|
|
Dump Controler ----- dump control load