need help in PMSG parameters

[eng_alhemyari]

Welcome all and thank u very much for the forum admin for this golden opportunity of members discussion.
I am a PhD student in wind energy conversion system area. I have a problem in getting approximate real values for the parameters of the PMSG to be used for simulation in MATLAB. I have tried to suppose some values but unfortunately there was a problem in the rectifier output power which should be very smooth to be used for maximum power point tracking control by using perturbation and observation method . In other words, the parameters strongly effects the performance of the whole system. I wonder and would be thankful if anyone can help me in getting parameters values (Rs, Lq,Ld, Pole numbers, flux) for 200RPM 100V 2KW PMSG. Or any advice that maybe help.

[TomW]

You need to clarify your achronyms. As in type the whole term.

It will be one of the first questions.

Tom

[eng_alhemyari]

The parameters are:
1- Rs: stator resistance.
2- Ld and Lq: direct and quadrature inductance,respectively.
3- P: number of poles.
4- flux: flux linkage established by magnets.

RPM: rotation per minute.
PMSG; permanent magnet synchronous generator.