Bob...... BEWARE
If you have anything like my luck, you will find out how to stick iron filings to every bit of the lathe, tool post, chuck, tooling, and anything else within a small distance of your turning rotors.
It seems unavoidable.
You will likely need a degaussing device to neutralise the lathe and your magnetic tooling....... think big AC electromagnetic.
I used a microwave transformer core (cut the "I"'s off and used just the EEEEs and the primary. Drove it from a 48v transformer into the 240v primary... Worked a treat.
I know you are only turning the epoxy off...... but when the owner turns up and uses it on steel..... all the chips try to migrate into the spiral of the chuck, and binds everything up.... he won't love you anymore thats for sure.
..................oztules