I was asked by Ed Armstrong, Lumberton NJ 08048 (USA) to post an advertisement on behalf of a friend of his. Neither of them have managed to become users here so I am doing this for them and for anyone who needs these big blades.
Blades were made in the 70's by Santa Rosa Machine in California. There a 3 blades.
Length 13' 8 1/8"
Chord 10 1/2", constant chord
10 Ply Sitka Spruce, bonded with resorcinol glue
Mounting flange on end of blade
Length 16"
Width 10 1/8 or 10 7/8, can't read friends writing
Thickness 2 1/2"
Ed uploaded some pictures of the blades to a friends company website, you can view them at
http://www.ladderracks.com/Blades/Windmill_Blades.htm There are 10 pictures, the total page size is about 1.5 MB. check them out - they are big blades!
If anyone is interested, then please contact me at
hugh@scoraigwind.co.uk and I will put you in touch with Ed and his friend. A bit of a long chain but we can make it shorter very quickly!
over to you...
Hugh
