Author Topic: Piggott Blades simplification possible?  (Read 77031 times)

0 Members and 2 Guests are viewing this topic.

doodadyoung

  • Newbie
  • *
  • Posts: 2
  • Country: us
Re: Piggott Blades simplification possible?
« Reply #99 on: February 09, 2014, 08:25:22 PM »
It will be a while before they are flying. I am starting on the mounting frame and the magnet disks next. I started with the blades first after seeing your post and the chain saw method. It was fun making them, I wish it had more blades to make! I am an R/C pilot and have made my own props on my giant scale planes. Thanks for your innovating thinking on this one. Good job