Author Topic: For Sale - DIY micro-hydro  (Read 1870 times)

0 Members and 1 Guest are viewing this topic.

bigfoot

  • Newbie
  • *
  • Posts: 4
For Sale - DIY micro-hydro
« on: March 11, 2013, 11:31:41 AM »
I have this setup, and 2 more treadmill motors ... make a reasonable offer.

It makes about an amp (12 VDC) with 40 psi at the inlet.  I am located in upstate NY, its not worth shipping ... so I need someone fairly local to make it worth while. 



DamonHD: I'm very sorry to do this, but out of fairness to other users I must enforce our no (commercial) links (etc) until 50 posts rule.  I should have noticed earlier, but was asleep at the wheel.  If you were giving it away I might have let it stand.
« Last Edit: March 19, 2013, 08:21:37 AM by DamonHD »

XeonPony

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 888
  • Country: ca
  • Sanity is over rated!
Re: For Sale - DIY micro-hydro
« Reply #1 on: March 18, 2013, 04:14:35 PM »
We need allot more info then that mate! 12v @ ?A

How many GPM ?

What type of blade/runner?

IE: 135V @ 30psi dynamic @ 85gpm @ 356W (2.64A) Francis style runner.

With that example we can get a guess at what your home brew system can do! Best of luck on the sale.
Ignorance is not bliss, You may not know there is a semie behind you but you'll still be a hood ornimant!

Nothing fails like prayer, Two hands clasped in work will achieve more in a minute then a billion will in a melenia in prayer. In other words go out and do some real good by helping!