Logged in users > User Diaries

Going Back 100 years

<< < (2/2)

GoVertical:
https://www.youtube.com/watch?v=W4CeeFkiePQ

Hi, a project I tried last summer just to get some experience with a mono tube boiler.  The boiler is configured similar to a LaMont design.
It is to complicated for the size motor I was working with. It may give you some ideas. I found the mono tube works great as long as your pumping water into it. All the parts are off the shelf plumbing parts, rated at a max of 500 psi. I used hydraulic hose to run the steam to the engine, I had no problems. I look forward to your results.

Navigation

[0] Message Index

[*] Previous page