Author Topic: Magnets  (Read 2588 times)

0 Members and 1 Guest are viewing this topic.

karma101

  • Newbie
  • *
  • Posts: 12
  • Country: us
Magnets
« on: March 19, 2015, 03:01:05 PM »
   It is time for me to buy my magnets. I had my rotor turned down and it is ready for 10mm thick magnets. any input as to the strength of the magnets and who to buy from?

karma101

  • Newbie
  • *
  • Posts: 12
  • Country: us
Re: Magnets
« Reply #1 on: March 19, 2015, 03:23:33 PM »
  My rotor is 4 3/4" long and 3 1/4" in Diameter. The coils are  6 in long. I plan on using this lay out.

karma101

  • Newbie
  • *
  • Posts: 12
  • Country: us
Re: Magnets
« Reply #2 on: March 19, 2015, 03:24:36 PM »
This layout

hiker

  • Hero Member
  • *****
  • Posts: 1661
  • BIG DOG
Re: Magnets
« Reply #3 on: March 20, 2015, 03:44:17 PM »
not sure where you could buy mags that size with mounting holes....why not just make a cage for the mags and then bury the mags in your favorite epoxy or other ? i superglued my mags down then buried them in epoxy stick--super hard-stands up to heat as well..
take your pick theirs plenty of diffrant ways to hold the mags down   ..  :}
WILD in ALASKA

hiker

  • Hero Member
  • *****
  • Posts: 1661
  • BIG DOG
Re: Magnets
« Reply #4 on: March 20, 2015, 03:47:10 PM »
epoxy stick...
WILD in ALASKA

karma101

  • Newbie
  • *
  • Posts: 12
  • Country: us
Re: Magnets
« Reply #5 on: March 21, 2015, 08:47:42 AM »
Thanks for your help have a good weekend