I've added a new version (click Raw of the github page and the download will start):
https://github.com/FinalFrontierPrototyping/AxialFluxGeneratorDesigner/raw/master/AxialFluxGeneratorDesigner/bin/Release/AxialFluxGeneratorDesigner.exeThis version includes improved calculation of :
Rotor inner and outer radius.
Stator inner and outer radius.
Coil leg width (simplified)
Coil dimension calculations (had a lot of impact on previous calculations)
Using the MagnetPoleArcToPolePitchRatio variable (ideal 2/PI) and the magnet width, the Rotor inner and outer radii are calculated. These values are used to calculate the coil dimensions (rotor inner and outer radii are leading in this calculation!) Also the Stator inner and outer radii are calculated. Calculation of the coil dimension is done using basic trigeometry (however a lot of steps).
Once again I will continue documentation but I think that for the people that know these types of generators they can give it a go
I stopped documentation because the concept of first determining the rotor inner and outer radii and calculate the rest based on these values had a lot of impact on the way I documented the software so far.....
I would like to have some test data so I can verify the calculations.
Questions, suggestions? Please let me know
Regards.