Author Topic: hysteresis  (Read 1426 times)

0 Members and 1 Guest are viewing this topic.

christopher

  • Jr. Member
  • **
  • Posts: 52
hysteresis
« on: October 03, 2017, 04:40:26 PM »
Is it possible to get as much as a 2.6 v   hysteresis from a ghurd lvd and if so how.

  thanks for any thoughts
 Chris

OperaHouse

  • Hero Member
  • *****
  • Posts: 1308
  • Country: us
Re: hysteresis
« Reply #1 on: October 04, 2017, 10:40:08 AM »
I don't think so it is a spot on shunt from what I can remember. You would have to ad another controller or UNO to switch in a resistor to get that

christopher

  • Jr. Member
  • **
  • Posts: 52
Re: hysteresis
« Reply #2 on: October 04, 2017, 11:13:12 AM »
Ok thanks.I did find a post where ghurd did say not to go bellow a 1.8 resistor for the rx