Homebrewed Electricity > Wind
axial generator with lamination core
mbouwer:
Windmill friends,
This forum seems to me the right place to exchange ideas on a test setup of an axial generator.
Now I have 2 magnet rings and an axle.
mbouwer:
Got 51 lamination packages now ( 20 x 8 x 8 ) cut out of transformer sheets.
I think of gluing 49 magnets 20 x 10 x 5 mm on the magnet backing rings ( thickness 4 mm)
joestue:
--- Quote from: mbouwer on November 07, 2017, 11:15:45 AM ---Got 51 lamination packages now ( 20 x 8 x 8 ) cut out of transformer sheets.
I think of gluing 49 magnets 20 x 10 x 5 mm on the magnet backing rings ( thickness 4 mm)
--- End quote ---
odd numbers don't work for magnets.
mbouwer:
Of course.
Then I can go to 48 or 54 magnets.
Or does it make sense to go to the maximum of 80 magnets?
mbouwer:
With 51 packages the space for the coil-legs is 8 mm.
I tend to 48 packages with coil-legs 9 mm.
Navigation
[0] Message Index
[#] Next page
Go to full version