Did you solder the wire ends together? One open connection would turn your output to zero.
It looks single-phase. What resistance do you measure between the two leads?
Did not solder as it's the eternal test machine... But i get a OHMS reading, not sure about the reading, the needle just hit it's maximum on the right side, i use it to check connections.
The magnets look 1/8" thick and doubled-up. Since they're on a 1/16" sawblade, the magnetic flux that should be transferring from pole to pole through the metal is probably escaping through the back of the disk. You could improve it by stacking 3 or 4 sawblades together.
I think about all the dead blades i threw in the garbage container last season (i'm a carpenter) and i cry as i only have 1 more dead blade here... I'll put the grinder zipcut in every iron things around here to get more iron discs.
It sort of looks like you can disassemble the stator... is that true? If so, you have a setup you can test and tweak until you have it right. I like that.
I'm dreaming of the day i will shoot nut locker on that rod once for all...
I'm also working on a double ceiling fan wind turbine and a TOP SECRET new invention project using peltier modules... If the modules i bought 40 days ago finally get here someday.