Hi all. I recently put up a TV antenna that allows me to get the one station I care about over the air. I should ground this thing. As I understand it, the right way would be to run the ground wire from the mast and cable braid to the same ground rod that the houses electrical panel is tied to.
I would prefer to do this outside of the house, since getting the ground wire into the service panel would be a major pain. Making the connection outside would be pretty easy except the ground rod is inside EMT that runs from the meter box to below the ground level. ( There's a seal on the meter box that I don't want to mess with.) Complicating things a bit, there are ground wires for the phone, ctv, etc. connected to the EMT so I can't just cut it to get at the wire inside.
There probably is an easy way of doing this, but I sure can't think of it. Any thoughts would be appreciated. Thanks in advance.
Pete