Formulas and calculators > Coil winding
Maybe a deal on general purpose magnet wire
(1/1)
DanG:
My copper greed kicked in just now and naturally I thought of youse folks.. .
Newark USA sent me a promotion I’ll share, for better or worse it is* cheapish.. .
105’ // 32m of 14/15 awg enamelled copper wire - yes not endless spool, perhaps a bunch of wastage if producing large coils.. .
Polyurethane insulation; description says 120C working temperature but spec sheet says 180C.. . ( http://www.farnell.com/datasheets/3170015.pdf )
Product link: https://www.newark.com/multicomp-pro/ecw1-5/enameled-wire-15awg-0-2-08mm2/dp/14M1982?
Breakdown Voltage : 7kV
Temperature Index : 180
Cut through : 2min ≥ 230°C
Heat Shock : 1d, 1/2 h ≥ 200°C
No — it is not the best for large wind Jennys but for lawn art and hobby turbines etc. the price is right at $7.77 a roll.. .
(For comparisons sake an example of tougher service grade wire : https://tinyurl.com/1cyx8bsb (inverter grade wire))
Your mileage may vary, unknown when offer expires, not an endorsement, bikini volleyball team delivery unavailable.. .
DanG:
Newark seemed to take offense at removing their ‘customer-haters club’ code from my emails URL... tested on two browsers but next day my product link staggered their spy code and errored out...
https://www.newark.com/multicomp-pro/ecw1-5/enameled-wire-15awg-0-2-08mm2/dp/14M1982?ost=ecw1.5
Maybe that will work.
Navigation
[0] Message Index
Go to full version