Notices > Classifieds

Axial Flux Turbine for sale

(1/1)

tompatell:
I have a 5 kW axial flux turbine for sale, as well as a 100 foot tower.  The turbine was built by Brugge Windpower.  The tower is from the NYS Thruway.  Both of these need completion and I am simply too old to finish everything.  I had planned on a tilt up tower and I have 1,000 ft of 1/2" galvanized cable, thimbles and clips as well.  Multiple stators are included for 48 volts or 120 volts.  Please contact me if you are interested.

SparWeb:
Hello
Thank you for posting.
Can you give a rough location where you are, just so the folks on one side of the continent won't get their hopes up if you're on the other side?

Do you want to set an asking price, or only want to hear offers?

tompatell:
I am located in Northern New York, near Watertown.  I was assembling this wind turbine project, including new 8' long fiberglass blades, the axial flux turbine with multiple stators, and the parts to build a 100' tower.  I have the proper hub to use these blades with this axial flux generator.  I have around $5500 invested in everything.  I would like to see someone finish the project and the price is not that important to me.  If someone is interested, please contact me and we can work out the details.  The tower sections will fit on an equipment trailer.  They are about 20 feet long.  The blades, generator, etc. will easily fit. 

machinemaker:
I am only a few hours away, south of Erie Pa, however, it is not in the budget this year. I will share this posting with some others who may be interested here in the area. A turbine has been on my wish list for years, but not this year. Best of luck.
Kent

tompatell:
Kent,
Thanks for the reply.  Please let me know if you are in the area.  We can discuss terms.  Thanks for your interest. 
Tom Patell

Navigation

[0] Message Index