Homebrewed Electricity > Wind
Classical US multibladed metal wind rotor....?
Mary B:
--- Quote from: brandnewb on March 04, 2024, 09:00:43 AM ---why though Mary do you seem to have components in pairs of 3?
--- End quote ---
For radios? 2 are Icom IC-9700 VHF/UHF/Microwave radios, one is 6 meters and shortwave, oddball on the left is driving a transverter that converts 144mhz to 902mhz(a USA only frequency and no radios made for it so need a converter), in the rack are amplifiers for different frequencies. The part of ham radio I do is very technical oriented, lot of building, tinkering...
brandnewb:
Yes understood mam,
But I meant this mirror I think it was they use to measure the distance between the earth and the moon on a "pico" scale.
Now I do think I understand where my reasoning went south as that is done using lasers with a rather narrow band wave.
Radio is still far too broad so aiming for that mirror, and then even assuming some would bounce back, it not going to do anything fur us truckers :(
:)
--- Quote from: Mary B on March 04, 2024, 11:38:04 AM ---
--- Quote from: brandnewb on March 04, 2024, 08:29:06 AM ---is not there still some kind of reflective surface there on the moon that would allow us to communicate between continents using radio frequencies?
If so then I would love to rent a bigg ass truck like the one in "big trouble in little china" and drive it around (completely unlicensed!! hmm bad idea!) and then talk to my fellow truckers that are just trucking goods mile by mile even though continents apart.
{1}https://www.youtube.com/watch?v=lmrnUMQNi9g
this is what I meant :)
{/1}
--- End quote ---
The surface of the moon will reflect radio waves, BUT it is lossy so the signals received back are extremely weak. I am not going to toss up the math, if you don't know the units it is meaningless... I have an effective radiated power of 76,763.745 watts... the reflected signal as received back on Earth is measured in pico watts aka very very little!
--- End quote ---
JW:
Oh good the forum is still up and running :)
I was allowed to reclaim flashsteam.com (url) have it for a year. All I can tell you if you are a new internet user plan on keeping access to the first email you use. I got lucky I originally hosted the url.
Oh ya, about the coatings... I saw this neat ass show of them painting hypersonic aircraft with a robot arm the precision was remarkable. Even same or modified thickness. I got to say that's some expensive stuff/coating.
JW
topspeed:
--- Quote from: Mary B on March 04, 2024, 03:00:05 AM ---
--- Quote from: topspeed on March 04, 2024, 02:26:06 AM ---Are you talking to ET ?
--- End quote ---
If he is on the moon I could! I bounce signals off the moon on some ham radio bands, other antennas are for long range(beyond line of sight) VHF/UHF/Microwave contacts... last summer I made a 600 mile contact on 1.296ghz (half the frequency your microwave oven operates at)... way beyond line of sight! On 144mhz I have talked to New Zealand, South Africa, Australia, All over Europe, Russia...
Adding the ability to do that on 1.296ghz(2.1 meter dish antenna like they used for TV back in the day) and 432mhz(Four 25 foot long yagi array that has a rotator to point them up like this pic of my 144mhz antennas tracking the moon)
--- End quote ---
Incredible....any suspicious signals so far ?
JW:
--- Quote from: topspeed ---No it says still...path cannot be empty.
What does it mean ? ;)
--- End quote ---
TechAdmin knows. Our host did something we used to have a 4 digit security pin. They changed the security pin to 6 digits. Then they erased all 4 digit pins.
This is why the info@flashsteam.com email is so important. without that email we cannot verify our/my identity. Untill Identified we cannot gain access to our server. Once identified we can get TechAdmin back in the server to clean things up. Were working on it.
JW
Navigation
[0] Message Index
[*] Previous page
Go to full version