Homebrewed Electricity > Solar

Dual Power Transfer Switch - Is it Possible???

<< < (2/2)

bigrockcandymountain:
If it is just a simple, "one generator or the other, but not both" situation, then a slide or rocker in the breaker panel will work fine.  Also, any manual transfer switch will work too.  One generator would be hooked on the "grid" side and the other on the generator side. 

What kind of inverter / battery charger does this feed?

As mary said, you'll only be switching the hot wires.  All the neutrals and grounds are common and will stay hooked up. 

The 120v generator will only power half the panel, and of course only send 120v out for charging. 

Dirtydiesel:
There is no grid side, this is totally offgrid. There are no utilities on property. I have a magnum 4400 inverter/charger.

The breaker  panel box in gen shed only has eight slots which are already full, one double for house, one double for welder and the rest are single pole for lights and receptacles in gen shed and conex/seacan.

There are 2 hots and a neutral feeding the breaker panel box which come out the wall where I had an old generator feeding power.. Those are the wires I need to somehow connect both generators to and be able to switch ti either the 240v or 120v generator.

What I am now thinking of doing is hook the 120v/3000 watt Yamaha to the breaker panel to charge solar batteries when needed (winter) and instead of using welder plug already wired in gen shed connected to breaker panel, to just make a adapter cord and plug welder directly into 240v generator.

I could just use the 240 volt generator for everything, but the Yamaha 3000watt is half the fuel price to operate and with a liter of gas at $1.60 ($6.40 gallon) and going up in price soon, I would prefer to use the Yamaha to charge solar batteries.

bigrockcandymountain:

--- Quote from: Dirtydiesel on April 11, 2024, 12:15:16 PM ---There are 2 hots and a neutral feeding the breaker panel box which come out the wall where I had an old generator feeding power.. Those are the wires I need to somehow connect both generators to and be able to switch ti either the 240v or 120v generator.

--- End quote ---
Any switch sold as a transfer switch could certainly be hooked on these wires and do what you are thinking.  I think your plan for the welder cord makes sense too.

Sounds like a nice setup you've got.  I have  the same inverter and so far it has been flawless.  I ask a lot of it sometimes these days too.  I run an 18" lathe off it, and just recently added a 3kw element to my gas oven to use power when we have lots.

I wish you could post pictures of your setup. It's always neat to see what other off gridders have come up with for solutions. 

Dirtydiesel:
I wish you could post pictures of your setup. It's always neat to see what other off gridders have come up with for solutions.
[/quote]

I agree, it is nice to see what others have done, a great way to find ways to incorporate and make things work better. My houses has a 48V solar system. My well pump shed has its own 12V solar system as the pump is a simple pump with a 12v pump and now I am installing a 12V solar system in my gen shed and sea can. I will only need to fire up the Yamaha 3000watt generator to charge house solar panels in the winter on the short when there isn't enough daylight, but that may be resolved when I add a couple more panels or fire up the 11,500 watt generator to weld.

Right now and through the summer into fall, it takes about 2 hours for sun to top up the batteries from night usage and 3-4 hours if it is overcast. If I can figure out why it won't let me upload picture and get that resolved, I will upload pics.

Mary B:

--- Quote from: Dirtydiesel on April 14, 2024, 08:32:07 PM ---I wish you could post pictures of your setup. It's always neat to see what other off gridders have come up with for solutions.

--- End quote ---

I agree, it is nice to see what others have done, a great way to find ways to incorporate and make things work better. My houses has a 48V solar system. My well pump shed has its own 12V solar system as the pump is a simple pump with a 12v pump and now I am installing a 12V solar system in my gen shed and sea can. I will only need to fire up the Yamaha 3000watt generator to charge house solar panels in the winter on the short when there isn't enough daylight, but that may be resolved when I add a couple more panels or fire up the 11,500 watt generator to weld.

Right now and through the summer into fall, it takes about 2 hours for sun to top up the batteries from night usage and 3-4 hours if it is overcast. If I can figure out why it won't let me upload picture and get that resolved, I will upload pics.
[/quote]

pic upload is being worked on... software issue...

Navigation

[0] Message Index

[*] Previous page