Attachments in this Topic

Attachment Size Downloads
signal-2023-11-14-155438_002.jpg Go to the Post 520.74 KB. 581
signal-2023-11-14-155504_002.jpg Go to the Post 391.09 KB. 572
signal-2023-11-14-160438_002.jpg Go to the Post 485.36 KB. 578
air wheels.jpg Go to the Post 173.52 KB. 637
magnet 1.png Go to the Post 2835.25 KB. 419
stacked magnets on powder.png Go to the Post 3289.96 KB. 433
stacked magnets on steelr.png Go to the Post 3097.23 KB. 435
magnet 1.png Go to the Post 2835.25 KB. 313
stacked magnets on powder.png Go to the Post 3289.96 KB. 303
stacked magnets on steelr.png Go to the Post 3097.23 KB. 309
diasaster averted.png Go to the Post 2529.32 KB. 413
IPE steel.png Go to the Post 3131.16 KB. 388
IPE steel.png Go to the Post 3131.16 KB. 291
field dominance between magnetss.png Go to the Post 1840.44 KB. 384
field dominance between magnetss.png Go to the Post 1840.44 KB. 297
test piece for grouped measurements.png Go to the Post 3077.72 KB. 364
test piece for grouped measurements.png Go to the Post 3077.72 KB. 269
818 mt when packaged.png Go to the Post 3402.73 KB. 465
stacked without powder setup top.png Go to the Post 3043.19 KB. 452
stacked without powder setup bottom.png Go to the Post 2945.46 KB. 439
stacked with powder setup bottom.png Go to the Post 2932 KB. 458
single array and paried single array.png Go to the Post 5329.33 KB. 424
MattTest.png Go to the Post 2222.45 KB. 384
hallback variant.png Go to the Post 101.03 KB. 416
test bench.png Go to the Post 2909.26 KB. 372
test bench.png Go to the Post 2909.26 KB. 304
u coil hamburger.png Go to the Post 3488.3 KB. 300
goal.png Go to the Post 94.35 KB. 488
goal.png Go to the Post 94.35 KB. 362
the case for iron powder coils is looking good.png Go to the Post 5485.58 KB. 404
single phase at target frequency.png Go to the Post 4592.29 KB. 371
coil holder test.png Go to the Post 561.53 KB. 371
I am using the oscope wrong.png Go to the Post 2118.38 KB. 377
for real.png Go to the Post 203.53 KB. 331
bearing umbrellas.png Go to the Post 3549.63 KB. 354

SMF 2.0.19 | SMF © 2024, Simple Machines | Terms and Policies
Page created in 0.026 seconds with 22 queries.