Attachments in this Topic

Attachment Size Downloads
signal-2023-11-14-155438_002.jpg Go to the Post 520.74 KB. 521
signal-2023-11-14-155504_002.jpg Go to the Post 391.09 KB. 526
signal-2023-11-14-160438_002.jpg Go to the Post 485.36 KB. 512
air wheels.jpg Go to the Post 173.52 KB. 576
magnet 1.png Go to the Post 2835.25 KB. 362
stacked magnets on powder.png Go to the Post 3289.96 KB. 377
stacked magnets on steelr.png Go to the Post 3097.23 KB. 372
magnet 1.png Go to the Post 2835.25 KB. 243
stacked magnets on powder.png Go to the Post 3289.96 KB. 253
stacked magnets on steelr.png Go to the Post 3097.23 KB. 250
diasaster averted.png Go to the Post 2529.32 KB. 354
IPE steel.png Go to the Post 3131.16 KB. 332
IPE steel.png Go to the Post 3131.16 KB. 229
field dominance between magnetss.png Go to the Post 1840.44 KB. 329
field dominance between magnetss.png Go to the Post 1840.44 KB. 238
test piece for grouped measurements.png Go to the Post 3077.72 KB. 309
test piece for grouped measurements.png Go to the Post 3077.72 KB. 200
818 mt when packaged.png Go to the Post 3402.73 KB. 409
stacked without powder setup top.png Go to the Post 3043.19 KB. 389
stacked without powder setup bottom.png Go to the Post 2945.46 KB. 371
stacked with powder setup bottom.png Go to the Post 2932 KB. 399
single array and paried single array.png Go to the Post 5329.33 KB. 370
MattTest.png Go to the Post 2222.45 KB. 334
hallback variant.png Go to the Post 101.03 KB. 357
test bench.png Go to the Post 2909.26 KB. 314
test bench.png Go to the Post 2909.26 KB. 249
u coil hamburger.png Go to the Post 3488.3 KB. 238
goal.png Go to the Post 94.35 KB. 433
goal.png Go to the Post 94.35 KB. 305
the case for iron powder coils is looking good.png Go to the Post 5485.58 KB. 336
single phase at target frequency.png Go to the Post 4592.29 KB. 297
coil holder test.png Go to the Post 561.53 KB. 311
I am using the oscope wrong.png Go to the Post 2118.38 KB. 314
for real.png Go to the Post 203.53 KB. 273
bearing umbrellas.png Go to the Post 3549.63 KB. 298

SMF 2.0.19 | SMF © 2024, Simple Machines | Terms and Policies
Page created in 0.024 seconds with 18 queries.