Attachments in this Topic

Attachment Size Downloads
gravity torque setup.png Go to the Post 4360.92 KB. 574
the failed coils.png Go to the Post 7757.01 KB. 551
failed stacked coil voltage test.png Go to the Post 5773.13 KB. 540
failed stacked coil voltage test oscope results.png Go to the Post 3725.28 KB. 500
IMG_20240129_180223.jpg Go to the Post 5724.85 KB. 591
repelling at 300mm inner radius3.png Go to the Post 1937.73 KB. 172
early results for 300mm inner radius repelling.png Go to the Post 2065.29 KB. 172
radia of magnets.png Go to the Post 199.28 KB. 200
double density magnets.png Go to the Post 1192.96 KB. 162
coil configs examples.png Go to the Post 1606.4 KB. 209
what motherboard are we talking about.png Go to the Post 107 KB. 252
Screenshot 2024-02-09 at 10-23-35 Kindle.png Go to the Post 360.25 KB. 230
I think a lot of wasted potential.png Go to the Post 4073.32 KB. 184
traditional at 300mm ID with non stacked coils at 200 winds 0.4mm diam..png Go to the Post 3092.07 KB. 181
Rotors.jpg Go to the Post 53.22 KB. 196
wide coil comparisso at 3.8Hz.png Go to the Post 5116.92 KB. 172
double density serpentine.png Go to the Post 5359.64 KB. 175
coil shape serpentine.png Go to the Post 5484.47 KB. 79
non stacked overlapping coil voltage graph.png Go to the Post 4311.95 KB. 175
non stacked overlapping coils seem to show interference.png Go to the Post 4522.84 KB. 188
false alarm. no interference demonstrated yet.png Go to the Post 5253.07 KB. 245
baseline coil.png Go to the Post 70.7 KB. 490
magnet configuration.png Go to the Post 26.7 KB. 474
base line measurements.png Go to the Post 224.32 KB. 511
Screenshot 2024-04-21 204406.png Go to the Post 122.03 KB. 270

SMF 2.0.19 | SMF © 2024, Simple Machines | Terms and Policies
Page created in 0.108 seconds with 20 queries.