View full version: Newbies
  1. Picking a PMDC motor to use
  2. anothr dumb ?
  3. Book Store
  4. 2 1/2 inch d. X 1/2 inch T. Micro. Mags
  5. water jet
  6. Motor
  7. has anyone used either of these motors for wind turbine?
  8. Noob questions
  9. Need info for wind power on Ice Shack
  10. Effect on cogging?
  11. motor!!!
  12. How many circuits do you run?
  13. build 1 larger diameter machine
  14. Thanks to ALL
  15. read the book and you will learn
  16. 1000 W generator head for wind gen
  17. Can This Rotor Work?
  18. Holes in magnets.
  19. How to use a battery hydrometer
  20. The AC option
  21. first HAWT project
  22. Interesting website
  23. I am building my first wind turbine. Please Help!!
  24. Treadmill motor wind generator
  25. What air gap to use between mag plate and stator
  26. HELP! Wind charging 12v 2cell bank
  27. Display all comments - Flat unthreaded
  28. Battery wiring???
  29. help with tower math
  30. Putting it all together...
  31. New to wind and have questions
  32. dual stator
  33. hugh piggot 8 feet axial flux
  34. VCR motor
  35. MGC's Baby Steps
  36. AC motor conversion to wind turbine
  37. 24 magnets
  38. If we use a DC motor for generator
  39. Small-scale Experiment: Controller
  40. Phase and frequency
  41. Winding recommendation
  42. Mixing same voltage but different wattage panels
  43. PFC
  44. cogging
  45. Using old UPS as inverter
  46. cracks in rotor pour
  47. Proper wire gauge size
  48. New Idea for Tower ?
  49. Starting over...Coil geometry
  50. Charging 48v bank from 12v panel