View full version: Wind
  1. Wincharger
  2. Dump load from battery rather than turbine?
  3. 20 Foot PVC Tower
  4. connecting more than one windmill
  5. My weekend fun... a Sav!
  6. MOVED: More or less coils? What gives
  7. Helix VAWT on 16" car rim alternator (deisigned based on brake drum alt.)
  8. Hugh Piggotts 2003 blade plans
  9. Ratio Formulas
  10. 3 Blade VWAT Test Over
  11. FANUC SERVO MOTOR HELP NEEDED
  12. My Mini Prop for my Mini Mill
  13. Desulfator. can bobbin inductors be used instead of toroid
  14. MOVED: 3 phase stator
  15. Ginlong Inverter
  16. warning lights
  17. Anemometer on tower question
  18. a windspeed question for the guru's
  19. Ceiling fan Alt.
  20. CNC cutting blades
  21. VAWT tower and bearings
  22. Hugh Piggott Recipe book
  23. No Load Question
  24. Balancing fiberglass blades using Rustoleum
  25. MOVED: 5kw failure
  26. Connecting to the power grid...
  27. Day at the Beach!
  28. MOVED: HELP...
  29. axial vs paykel and fisher
  30. Finally some progress!
  31. MOVED: Building first wind generator. Have a few questions.
  32. First fly on test tower
  33. New 18 foot blades up and flying
  34. Treadmill motor, is this a good one?
  35. VAWT Bearings, simple, cheep effective – thus far.
  36. Ferrite powder from inductor/ transformer cores
  37. Another good reason to pin magnets
  38. question about upgrading power.
  39. Blade matching help needed
  40. 12' progress update & photos
  41. ametek 38vdc wood blades help
  42. balancing finished
  43. New Tower From Scratch (part one)
  44. round magnet spacing as a percentage.
  45. Visited three wind farms on holiday...
  46. Safety Device?
  47. Does anyone have the S822/S823 airfoil profile in CAD format or coordinates?
  48. MOVED: new with axail flux generator
  49. a few questions relating to alternator efficiency
  50. Coil spacing Question?