View full version: Wind
  1. More progress on my 17
  2. Finally fried
  3. Tower Extension
  4. Potential benefits, bldg higher voltage machine, step-down transformer?
  5. Magnets with a capital T
  6. stator problem
  7. Patching castings?
  8. more magnets
  9. Noisy Turbine Blades
  10. Diy VAWT Alternator
  11. Another fun trip to Guemes Island
  12. My washing machine drum vawt
  13. Guy anchor weight?
  14. Mini ECM Windmill
  15. A few questions
  16. And Yet Another Otherpower 10 Footer Flies
  17. Tusas Turbine in the wind!
  18. ametek questions
  19. FLYING AT LAST!
  20. 17' stator help
  21. I got started on my 17 footer today.
  22. WinJen made it through 62 MPH winds last night.
  23. Yaw bearing tower stub question.
  24. Misc. 10' Wind Turbine Questions - Part 2
  25. ball bearings as sliprings.is it a good idea??
  26. Update on the extruded PVC blades.
  27. My 10-footer, Presentation coming up
  28. 17' turbine - time for maintenance
  29. Otherpower 7 footer air gap
  30. 14 inch Rotors
  31. Respooling magnet wire
  32. Coil winding troubles in 20ft project
  33. Coils heat emission
  34. New Wind Turbine Flying
  35. 10 ' Axial Flux Homemade
  36. 12 footer expected top rpm?
  37. KWH Confusion
  38. Website Tutorial Journal
  39. looking for software
  40. Did my homework
  41. another coil question
  42. more windings give MUCH more power, why?
  43. Fierglass blades, finally out of the mold + Question?
  44. I've been busy these last couple days
  45. Small Axial Flux Performance
  46. Automatic Wind Turbine Shutdown
  47. BMN Wind Turbine Tail Section, neighbors
  48. tubine redesign
  49. need advice on 13 AWG
  50. problem with my coils