View full version: Wind
  1. First Stator
  2. Windcharger from the 40's
  3. No voltage on Disk rotor-what am I doing wrong
  4. Low Voltage and amps
  5. Testing Stator
  6. Kindly guid me about the hub
  7. Finishing Blades
  8. Problem with Torque
  9. Developed a click ...
  10. magnet rotor
  11. bearing maintenance
  12. Blade design for small blades
  13. Free spinning blades at low winds
  14. Coils for a low speed turbine
  15. Barrel Blades made, Mine work good so far.
  16. "Proprotor 0.1" ... ?
  17. F&P Floating Hub - Part II
  18. Any one using Mike's Windmill Turbine
  19. alumiumn rotors
  20. Edge tape
  21. New wind turbine day 4
  22. Is this High V treadmill motor any good
  23. Leading edge of prop - round or sharp?
  24. Terminology?
  25. Best meter to measure amps from solar & wind generator
  26. New way to construct a rotor
  27. Big Homebrew Wind turbine
  28. 14 th geny flying.
  29. Stator winding styles
  30. 1/8 inch aircraft cable ok ?
  31. Wiring up Coils
  32. When things go bad
  33. Second bonus scored on weather Station
  34. Wind gen tower spacing
  35. Building my Wind generator
  36. New Wind Turbine Day 3
  37. Glue, would this work (used it auto repair)
  38. Building my Wind generator
  39. New Wind Turbine day 2
  40. For PaulM2 & Monzadude.
  41. genny belt drive
  42. My New Wind Turbine
  43. Wards New Wind Turbine
  44. Understanding Furling??
  45. i cant find it
  46. Coil winding&Volvo rotors
  47. can you ID this machine from photo?
  48. What now?
  49. 8 foot wind genny
  50. A-HUB arrangement bearing for yaw?