Attachments in this Topic

Attachment Size Downloads
signal-2023-11-14-155438_002.jpg Go to the Post 520.74 KB. 582
signal-2023-11-14-155504_002.jpg Go to the Post 391.09 KB. 573
signal-2023-11-14-160438_002.jpg Go to the Post 485.36 KB. 579
air wheels.jpg Go to the Post 173.52 KB. 638
magnet 1.png Go to the Post 2835.25 KB. 420
stacked magnets on powder.png Go to the Post 3289.96 KB. 434
stacked magnets on steelr.png Go to the Post 3097.23 KB. 436
magnet 1.png Go to the Post 2835.25 KB. 314
stacked magnets on powder.png Go to the Post 3289.96 KB. 304
stacked magnets on steelr.png Go to the Post 3097.23 KB. 310
diasaster averted.png Go to the Post 2529.32 KB. 414
IPE steel.png Go to the Post 3131.16 KB. 389
IPE steel.png Go to the Post 3131.16 KB. 292
field dominance between magnetss.png Go to the Post 1840.44 KB. 385
field dominance between magnetss.png Go to the Post 1840.44 KB. 298
test piece for grouped measurements.png Go to the Post 3077.72 KB. 365
test piece for grouped measurements.png Go to the Post 3077.72 KB. 270
818 mt when packaged.png Go to the Post 3402.73 KB. 466
stacked without powder setup top.png Go to the Post 3043.19 KB. 454
stacked without powder setup bottom.png Go to the Post 2945.46 KB. 440
stacked with powder setup bottom.png Go to the Post 2932 KB. 460
single array and paried single array.png Go to the Post 5329.33 KB. 425
MattTest.png Go to the Post 2222.45 KB. 385
hallback variant.png Go to the Post 101.03 KB. 417
test bench.png Go to the Post 2909.26 KB. 374
test bench.png Go to the Post 2909.26 KB. 305
u coil hamburger.png Go to the Post 3488.3 KB. 301
goal.png Go to the Post 94.35 KB. 489
goal.png Go to the Post 94.35 KB. 363
the case for iron powder coils is looking good.png Go to the Post 5485.58 KB. 406
single phase at target frequency.png Go to the Post 4592.29 KB. 375
coil holder test.png Go to the Post 561.53 KB. 372
I am using the oscope wrong.png Go to the Post 2118.38 KB. 377
for real.png Go to the Post 203.53 KB. 331
bearing umbrellas.png Go to the Post 3549.63 KB. 354

SMF 2.0.19 | SMF © 2024, Simple Machines | Terms and Policies
Page created in 0.022 seconds with 17 queries.