Attachments in this Topic

Attachment Size Downloads
gravity torque setup.png Go to the Post 4360.92 KB. 579
the failed coils.png Go to the Post 7757.01 KB. 560
failed stacked coil voltage test.png Go to the Post 5773.13 KB. 554
failed stacked coil voltage test oscope results.png Go to the Post 3725.28 KB. 511
IMG_20240129_180223.jpg Go to the Post 5724.85 KB. 602
repelling at 300mm inner radius3.png Go to the Post 1937.73 KB. 173
early results for 300mm inner radius repelling.png Go to the Post 2065.29 KB. 173
radia of magnets.png Go to the Post 199.28 KB. 201
double density magnets.png Go to the Post 1192.96 KB. 163
coil configs examples.png Go to the Post 1606.4 KB. 210
what motherboard are we talking about.png Go to the Post 107 KB. 253
Screenshot 2024-02-09 at 10-23-35 Kindle.png Go to the Post 360.25 KB. 231
I think a lot of wasted potential.png Go to the Post 4073.32 KB. 185
traditional at 300mm ID with non stacked coils at 200 winds 0.4mm diam..png Go to the Post 3092.07 KB. 182
Rotors.jpg Go to the Post 53.22 KB. 197
wide coil comparisso at 3.8Hz.png Go to the Post 5116.92 KB. 173
double density serpentine.png Go to the Post 5359.64 KB. 178
coil shape serpentine.png Go to the Post 5484.47 KB. 80
non stacked overlapping coil voltage graph.png Go to the Post 4311.95 KB. 176
non stacked overlapping coils seem to show interference.png Go to the Post 4522.84 KB. 190
false alarm. no interference demonstrated yet.png Go to the Post 5253.07 KB. 257
baseline coil.png Go to the Post 70.7 KB. 508
magnet configuration.png Go to the Post 26.7 KB. 490
base line measurements.png Go to the Post 224.32 KB. 538
Screenshot 2024-04-21 204406.png Go to the Post 122.03 KB. 300

SMF 2.0.19 | SMF © 2024, Simple Machines | Terms and Policies
Page created in 0.106 seconds with 19 queries.