Attachments in this Topic

Attachment Size Downloads
signal-2023-11-14-155438_002.jpg Go to the Post 520.74 KB. 344
signal-2023-11-14-155504_002.jpg Go to the Post 391.09 KB. 348
signal-2023-11-14-160438_002.jpg Go to the Post 485.36 KB. 346
air wheels.jpg Go to the Post 173.52 KB. 396
magnet 1.png Go to the Post 2835.25 KB. 194
stacked magnets on powder.png Go to the Post 3289.96 KB. 197
stacked magnets on steelr.png Go to the Post 3097.23 KB. 192
magnet 1.png Go to the Post 2835.25 KB. 77
stacked magnets on powder.png Go to the Post 3289.96 KB. 77
stacked magnets on steelr.png Go to the Post 3097.23 KB. 77
diasaster averted.png Go to the Post 2529.32 KB. 186
IPE steel.png Go to the Post 3131.16 KB. 160
IPE steel.png Go to the Post 3131.16 KB. 57
field dominance between magnetss.png Go to the Post 1840.44 KB. 163
field dominance between magnetss.png Go to the Post 1840.44 KB. 58
test piece for grouped measurements.png Go to the Post 3077.72 KB. 135
test piece for grouped measurements.png Go to the Post 3077.72 KB. 41
818 mt when packaged.png Go to the Post 3402.73 KB. 233
stacked without powder setup top.png Go to the Post 3043.19 KB. 224
stacked without powder setup bottom.png Go to the Post 2945.46 KB. 221
stacked with powder setup bottom.png Go to the Post 2932 KB. 224
single array and paried single array.png Go to the Post 5329.33 KB. 198
MattTest.png Go to the Post 2222.45 KB. 163
hallback variant.png Go to the Post 101.03 KB. 182
test bench.png Go to the Post 2909.26 KB. 143
test bench.png Go to the Post 2909.26 KB. 68
u coil hamburger.png Go to the Post 3488.3 KB. 81
goal.png Go to the Post 94.35 KB. 269
goal.png Go to the Post 94.35 KB. 144
the case for iron powder coils is looking good.png Go to the Post 5485.58 KB. 168
single phase at target frequency.png Go to the Post 4592.29 KB. 142
coil holder test.png Go to the Post 561.53 KB. 135
I am using the oscope wrong.png Go to the Post 2118.38 KB. 141
for real.png Go to the Post 203.53 KB. 103
bearing umbrellas.png Go to the Post 3549.63 KB. 119

SMF 2.0.19 | SMF © 2024, Simple Machines | Terms and Policies
Page created in 0.095 seconds with 20 queries.