View full version: User Diaries
  1. Two projects nearing completion
  2. Number of windings in the coils?
  3. Part Locations
  4. more pictures of my easy pole
  5. Jerry's dual rotor stator
  6. new old type of blade
  7. pictures of my energy project
  8. Updated: Electronic Refrigerator Thermostat
  9. solar panels that work after dark
  10. Making a lathe
  11. regulator+dump load?
  12. Savinous Overlap video
  13. Jerry's dual rotor pix update
  14. Jerry's dual rotor update.
  15. My first set of blades
  16. My vawt pictures
  17. Coffee can mill
  18. My Magnets
  19. New Wind Turbine
  20. Jerry's dual rotor update.
  21. Controller Box Build
  22. Electronic Refrigerator Thermostats
  23. diary post
  24. scr latch
  25. Extending the rotor blade diameter from 3.6 meters to 4.4 meters
  26. How others do it
  27. not getting expected voltage, ideas?
  28. Minimill
  29. Power calculations
  30. Three phase video
  31. Scrounging parts for the 8" dual rotor.
  32. 3/4 inch sphere test
  33. Simplified star - delta switch
  34. update
  35. Stator building options
  36. 12 foot 12 volt help
  37. Jerry's new dual rotor update.
  38. Using Woodstove as a Water Pre-heater
  39. Synchronous Rectifier suits power switching applications
  40. Noobie Saying Hello!
  41. qth, gray line map
  42. todays progress on the 10 ft mill
  43. Pitch control diagram
  44. phase check?
  45. Jacobs 1000w 1980's Windmill
  46. Diode, Placement?
  47. Latest 20 ft dia. wood blade set 2
  48. So far so good
  49. NEW MILL IN THE AIR
  50. I found a real nice Rotor and Spindle assembly